Card ยท Home

The Scene card

FreeWorks with: Home Assistant, Apple HomeAbout 2 minutes to set up

One button for "Movie night", "Good morning" or any scene you have set up in your smart home.

What it shows

A list of scenes (and, on Home Assistant, scripts) with an Activate button beside each. A scene is a preset your smart home already knows: several lights at set levels, the blinds down, the heating on. Theatrium does not create scenes; it gives you a button for the ones you have.

The Scene card. Each row runs one scene or script.
The Scene card. Each row runs one scene or script.

Add the card

Every card is added the same way. If you have done this before, skip ahead.

  1. On the dashboard, move to a card you want to replace. Press and hold the center of the remote's pad for about a second. The card dims and a Modify button appears on it.
    < TV ▶❚❚ mute +−
    Hold the center of the pad on the card you want to change.
  2. Press the center once to choose Modify. The Choose a card screen opens.
    The Choose a card screen
    The Choose a card screen. The list down the left side narrows the cards by group.
  3. On the left, choose Home, then move right and choose Scene. (You can also leave the list on All and scroll; cards are in alphabetical order inside each group.)
  4. Tick between one and eight scenes or scripts.
  5. Finish with the Add to Dashboard button (on some cards it reads Add Scene). You return to the dashboard with the new card in place.

Using it every day

  1. Move to the card and press the center to enter it.
    < TV ▶❚❚ mute +−
    Press the center of the pad
  2. Move to the scene you want and press the center on Activate. The scene runs at once.
  3. Press Back to leave.